PHOSPHATE

Too much phosphate in the water usually causes a reduced water quality. Phosphates enter the pond, for example, via refill water and fish food or are produced by the decay of organic matter in the water. Phosphate present in the water is a nutrient for undesirable turbidity in the water. In order to improve the water quality, a reduction of the phosphate value is necessary. PHOSPAT® 1 filter cartridge for long-term phosphate reduction. The phosphate reduction results in clearer water and supports the biofilter in its work. The filter cartridge is particularly suitable for swimming ponds, natural pools and koi ponds with a water volume of up to 50 m³. For the filtration of larger water volumes, multiple filter cartridges can be combined. The absorption capacity of PHOSPAT® 1 is 90 g PO4³. For an ideal filter effect, connect the PHOSPAT® 1 to a pump with a capacity of approx. 800 l/h. Zu viel Phosphat im Wasser bedingt meist eine verminderte Wasserqualität. Phosphate gelangen beispielsweise über Nachfüllwasser und Fischfutter in den Teich oder entstehen durch das Verfaulen organischer Anteile im Wasser. Die im Wasser vorhandenen Phosphate bilden den Nährstoff für unerwünschte Trübungen im Gewässer. Um die Wasserqualität zu verbessern, ist eine Reduzierung des Phosphatwertes notwendig. PHOSPAT® 1 Filterpatrone zur langfristigen Phosphatreduktion. Durch die Phosphatreduktion wird das Wasser klarer und der Biofilter wird in seiner Arbeit unterstützt. Die Filterpatrone ist besonders geeignet für Schwimmteiche, Naturpools und Koiteiche mit einem Wasservolumen von bis zu 50 m³. Für die Filterung größerer Wassermengen können mehrere Filterpatronen kombiniert werden. Die Aufnahmekapazitäten liegt beim PHOSPAT® 1 bei 90 g PO4³. Für eine optimale Filterwirkung schließen Sie den PHOSPAT® 1 an eine Pumpe mit einer Leistung von ca. 800 l/h an. PHOSPAT® 1 - Filterpatrone zur langfristigen Phosphatreduktion im Gewässer - Besonders geeignet für Schwimmteiche, Koiteiche und Naturpools mit einer Wasserkapazität von bis zu 50 m² - Aufnahmekapazität von  90 g Phosphat - Optimale Filterwirkung bei Verwendung einer Pumpe mit einer Leistung von ca. 800 l/h - Für die Filterung größerer Wassermengen kombinierbar mit weiteren Filterpatronen - Druckbeständig bis max. 4 bar   

Too much phosphate in the water usually causes a reduced water quality. Phosphates enter the pond, for example, via refill water and fish food or are produced by the decay of organic matter in the water. Phosphate present in the water is a nutrient for undesirable turbidity in the water. In order to improve the water quality, a reduction of the phosphate value is necessary. PHOSPAT® 3 filter cartridge for long-term phosphate reduction. The phosphate reduction results in clearer water and supports the biofilter in its work. The filter cartridge is particularly suitable for swimming ponds, natural pools and koi ponds with a water volume of up to 150 m³. For the filtration of larger water volumes, multiple filter cartridges can be combined. The absorption capacity of PHOSPAT® 3 is 270 g PO4³. For an ideal filter effect, connect the PHOSPAT® 3 to a pump with a capacity of approx. 2,500 l/h. PHOSPAT® 3 - Filter cartridge for long-term phosphate reduction in water. - Particularly suitable for swimming ponds, koi ponds and natural pools with a water capacity of up to 150 m². - Absorption capacity of 270 g phosphate - Optimal filtering effect when using a pump with a capacity of approx. 2,500 l/h - Can be combined with other filter cartridges for filtering larger quantities of water - Pressure resistant up to max. 4 bar   

PHOSPAT® ACUTE 1L - First Aid for Cloudy Pond Water Excessive phosphate in water usually leads to reduced water quality. Phosphates enter the pond, for example, through top-up water and fish food, or are generated by the decomposition of organic matter in the water. The phosphates present in the water serve as a nutrient source for unwanted cloudiness in the pond. To sustainably improve water quality, a targeted reduction of phosphate levels is necessary. PHOSPAT® ACUTE, available in a convenient 1-liter container, is first aid for cloudy water: the product binds the phosphate present in the water into flakes that can be easily filtered out - for clear, healthy pond water. With a binding capacity of 40 g of phosphate per liter, PHOSPAT® ACUTE delivers effective phosphate reduction. If the product remains unbound, it stays active in the water. PHOSPAT® ACUTE is particularly well suited for swimming ponds, natural pools, lakes, and koi ponds. Caution: Do not use in ponds stocked with sturgeon. Advantages of PHOSPAT® ACUTE at a glance: - Binds phosphate in the water into filterable flakes - Binding capacity of 40 g phosphate per liter - Unbound product remains active in the water - Biologically safe for humans and animals (exception: sturgeon-stocked ponds) - Manual dosing: 0.2 l per 100 m³ of water/week - Automatic dosing: 1:10 mixture with water via any conventional dosing system - Ideal for swimming ponds, natural pools, lakes, and koi ponds   

aToo much phosphate in the water usually causes a reduced water quality. Phosphates enter the pond, for example, via refill water and fish food or are produced by the decay of organic matter in the water. Phosphate present in the water is a nutrient for undesirable turbidity in the water. In order to improve the water quality, a reduction of the phosphate value is necessary. The first aid for cloudy water - PHOSPAT® ACUTE in a 5 litre container binds the existing phosphate in the water into flakes that can be easily filtered out. PHOSPAT® ACUTE has a binding capacity of 40 g phosphate per litre. If the agent is not bound, it remains active in the water. PHOSPAT® ACUTE is particularly suitable for swimming ponds, natural pools, lakes and koi ponds. Do not use in case of sturgeon population. The first aid for cloudy water - Binds phosphate in the water into flakes that can be easily filtered out - Binding capacity of 40 g phosphate per litre - Unbound agent remains active in the water - Biologically harmless for humans and animals; exception: sturgeon stocking - do not use here! - Manual dosage: 0.2 l per 100 m³ water/week - Automatic dosing: 1:10 mixture with water via any conventional dosing system   

Too much phosphate in the water usually causes a reduced water quality. Phosphates enter the pond, for example, via refill water and fish food or are produced by the decay of organic matter in the water. Phosphate present in the water is a nutrient for undesirable turbidity in the water. In order to improve the water quality, a reduction of the phosphate value is necessary. The PHOSPAT® FF filter cartridge reduces phosphate in the refill water with an absorption capacity of up to 90 mg PO4³ per cartridge. Connect the PHOSPAT® FF between your water connection and the hose and directly discharge the water into the pond. This way you keep the phosphate levels constant even when refilling. For an ideal filtering effect, the water should have a flow rate of approx. 1,100 l/h. Filter cartridge for phosphate reduction in refill water - Absorption capacity of up to 90 g phosphate - Optimum filter effect at a water flow rate of approx. 1,100 l/h - Pressure resistant up to max. 4 bar   

Too much phosphate in the water usually causes a reduced water quality. Phosphates enter the pond, for example, via refill water and fish food or are produced by the decay of organic matter in the water. Phosphate present in the water is a nutrient for undesirable turbidity in the water. In order to improve the water quality, a reduction of the phosphate value is necessary. PHOSPAT® NPF 2 filter unit for phosphate reduction without pre-filter. The filter unit is used in the shallow water area (7 to 15 cm below the water surface) of your water body. The filter unit is suitable for a water volume of up to 100 m³. By means of a pump connected to the NPF unit, the water is sucked in and contained phosphate is reduced to a value of less than 0.035 mg/l. The filter units are protected from contamination by the sieve cover. The filter cassette can be easily replaced and repurchased as soon as the absorption capacity is reached. PHOSPAT® NPF 2 has an uptake capacity of up to 180 g PO4³ per filter cassette at a recommended flow rate of 1,600 l/h. The pressure loss through the filter unit is < 0.05 bar. The filter unit can be backwashed. Filter unit for phosphate reduction without pre-filter in shallow water areas - Particularly suitable for a water capacity of up to 100 m² - Absorption capacity of 180 g phosphate - Optimum filter effect when using a pump with a capacity of approx. 1,600 l/h - Pressure loss through the pre-filter < 0.05 bar - Filter unit can be backwashed - Easily replaceable filter cassette - The PHOSPAT® NPF 2 must be placed in the water so that it is always approx. 7 - 15 cm below the water surface